Thickened labor protection workers' gloves

Labor protection glove: it is labor protection glove, which is the oldest kind of gloves that people are familiar with. The first layer of cow leather, goat skin, pig skin and sheep skin are made of the above leather, and are not easy to be damaged. The long service life and fine processing make the leather gloves comfortable to wear and accurately grasp the articles. In addition, the leather gloves also have heat protection and insulation The advantages of good performance.

Material category editing

Cuticle:

The outermost layer of leather, taken from the skin part of leather, which does not require any machining or finishing.

The advantages of the first layer gloves: dexterous operation, comfort, precise grasping performance.

Split skin:

The inner layer of leather is obtained by cutting open or removing the outer layer of dermis.

Two layer leather gloves advantages: wear-resistant, suitable for heavy physical labor.

Types of leather and its advantages

cowhide:

Cow's head skin: most protective gloves use cow's head skin, which is mainly scraped from the ribs. Features: soft, dexterous, comfortable, good wear resistance, tear resistance and puncture resistance.

Cow split: most gloves made of split skin are used for handling and heat protection. Generally, the double skin on the back of cattle is selected, and the shoulder part is less selected. The quality of the double skin on the rib is not good, so it is seldom used. Features: the cost is lower than that of cattle head leather, and the wear resistance is excellent.

Goat skin:

Single cortex: its ordinary thickness can't pull out the double skin, its advantage is lighter than the cowhide. Because it uses the original thickness, it is suitable for making gloves with good mechanical resistance. Because the fiber is not cut off, its wear resistance and puncture resistance are enhanced. If it is blended, it will have better contact effect. Features: soft, dexterous, good wear resistance, tear resistance and puncture resistance. Its wear resistance depends on the thickness of the leather. The commonly used thickness is 1.1-1.3mm (good mechanical properties) or 0.6-1.0mm (good softness and dexterity).

Pigskin:

Pig's head skin and split skin: most of them are concentrated in Asian countries. Because of its poor mechanical resistance and poor dexterity after mixing, it is used as gloves with simple isolation effect. Features: low price.

Lamb.

Single layer leather: due to its poor wear resistance and tear resistance, it is usually only used to make ordinary gloves. The thickness of lamb skin is directly proportional to its dexterity. The thinner the skin is, the more dexterous and comfortable it is. Features: soft and dexterous.

Resistance of leather and main use of leather gloves

Leather gloves: handling or handling of small and medium objects.

Oil coated waterproof leather gloves: installation of oily parts, handling of oily steel plate, woodworking, outdoor or wet work.

Double layer leather gloves: installation and handling of sharp objects, cutting work, slippery objects and welding products.

Heat resistant double skin gloves: operation of heating articles, demoulding and welding.

Coated leather gloves: heavy goods, sharp goods operation, antifouling.

Special treatment of glove leather

Waterproof skin:

Treatment with mineral oil or fluorinated resin to prevent the entry of water can improve the mechanical properties of leather, make it more wear-resistant, increase the comfort (softness) and extension Dexterity (tactility) of gloves, and extend the service life.

Features of waterproof gloves: better dexterity, soft after use in wet places, longer service life, comfortable and accurate movement.

Oiling waterproof skin: treated with synthetic mineral oil or fluorinated resin, it can prevent water and oil from entering. This treatment improves the mechanical properties of the leather, making it more durable, and increases the comfort (softness) and extension Dexterity (tactility) of the gloves, as well as prolonging their life.

Features of waterproof leather gloves: better dexterity, soft after use in oily and humid places, longer service life and accurate movement.

Heat resistant leather: treated to make leather more heat-resistant and reduce shrinkage when exposed to flame. This treatment makes the leather contact with the heat source, which is easy to identify and will dye the leather yellow. This treatment can also be applied to the scalp.

Polyurethane coating two-layer skin:

PU coating on the second leather can prevent water and oil from entering and improve the mechanical properties of leather.

Materials for vibration damping:

Before selecting vibration resistant materials, you must know the following information:

Frequency of vibration

Whether it is intermittent or continuous vibration, continuous vibration generated by reciprocating tools and rotary tools or continuous vibration generated by air pressure tools.

Leather or textile appearance:

The cushioning structure makes the skin of the hand feel comfortable. The GELFOM damping layer is protected by two layers of rubber foam to protect the GELFOM damping layer. This is an ideal structure for weakening and absorbing vibration.

The commonly used insulating gloves are 12 kV rubber insulated gloves and 35 kV rubber insulated gloves

Performance of 12 kV rubber insulated gloves:

Rubber insulated gloves, factory test voltage 12000V. It is mainly used in high voltage power equipment above 1000V as auxiliary safety appliance. It is used as basic safety appliance on low voltage electrical equipment below 1000V.

Light industry assembler, material handling personnel, container handling personnel, transporting or receiving goods personnel, packaging, maintenance personnel, household laundry.